| Step | | Procedure & Parts & Tools |
| 1 |
|
PULL TO REMOVE THE RED CAPPED HOSE FROM MACHINE. PLACE HOSE NEAR DRAIN AND REMOVE CAP
|
| 2 |
|
PULL TO REMOVE THE BLUE CAPPED HOSE FROM MACHINE. PLACE HOSE NEAR DRAIN AND REMOVE CAP
|
| 3 |
|
REMOVE THE 2 TANK BOLTS ON EACH SIDE OF THE MACHINE. THESE BOLTS ARE LOCATED AT THE FRONT OF THE MACHINE AT THE BASE. LIFT THE TANK TO OPEN THE MACHINE.
| Wrench-Allen metric 6.0mm |
|
|
| 4 |
|
REMOVE THE 3 BOLTS HOLDING THE BRUSH MOTOR
| Wrench-metric 10mm |
|
|
| 5 |
|
TURN THE BRUSH MOTOR NUT. IF IT TURNS FREELY, THE BRUSH MOTOR IS OKAY AND IS NOT LOCKED UP. IF THE BRUSH MOTOR IS OKAY, REVERSE STEPS 3 AND 4 TO REASSEMBLE THE MACHINE.
| Wrench-metric 10mm |
|
|